00. Publieke prijslijst
  1. All products
  2. AUTOMATIC CYLINDERS
  3. BURG-WÄCHTER ZBK 72 AUTOMATIC CYLINDER

BURG-WÄCHTER ZBK 72 AUTOMATIC CYLINDER

https://besa-sloten.be/web/image/product.template/10098/image_1920?unique=2445d4d
17.16 EUR 17.16

20.76 € 20.76 €

17.16 € 17.16 € excl. VAT

On order

17.16 € VAT Excluded

PRICE ON REQUEST

  • Outer diameter Ø (mm)
  • Inner diameter Ø (mm)
  • Distance of flat sides (mm)
  • Distance from housing to lip (mm)
  • Type of closure

Deze combinatie bestaat niet.

CONTACT US FOR YOUR PRICE
Outer diameter Ø (mm): Ø 22.5
Inner diameter Ø (mm): Ø 19.4
Distance of flat sides (mm): 16.4
Distance from housing to lip (mm): 16
Type of closure: Keyed different (KD)


Article number: ZBK 72
Bar code: 4003482223802

CYLINDER ZBK 72 WITH TWO BOLTS: REPLACEMENT FOR ROMBI & KNOBLOCH LETTERBOXES

Your letterbox lock needs to be replaced? No problem with the right letterbox lock as an inexpensive replacement part. BURG-WÄCHTER offers separate letterbox cylinders for simple and quick self-installation. The letterbox cylinders are available in two sizes. The letterbox cylinders can be used on many letterboxes of different makes without any problems. Not only from the house of BURG-WÄCHTER. 

INSTALL CYLINDER ZBK 72 IN JUST A FEW STEPS

The letterbox lock ZBK 72 is suitable for letterboxes made by Rombi and Knobloch. If the lock of your letterbox from one of these manufacturers needs to be replaced, the letterbox cylinder ZBK 72 is the right choice. After a few simple steps, your letterbox is ready for use again. The cylinder is supplied with two bolts.This way you can find the right bolt for your letterbox. Assembly tip: Note that the key is not removed during the assembly process. 

1. Technical data sheet for letterbox cylinder ZBK 72 from BURG-WÄCHTER: 

It is very important to maintain your lock properly, especially if it is exposed to the elements of nature a lot. Dirt and corrosion can build up, especially during cold and inclement weather. Therefore, we recommend lubricating your door lock at least twice a year or ideally at every seasonal change. 
To make sure your lock runs smoothly again, we recommend using lubricants such asWD-40 WHITE LITHIUM SPRAY GREASE. The correct use of these oils is essential.

​In general, there are two solutions for lock maintenance: prevention/protection and troubleshooting. 

If a lock is difficult to open, it could be due to two reasons: 
​
​1. The key and lock are not yet properly matched, this is common with a new lock

​​2. There is dirt build-up or rust in the lock

In these cases, we recommend using WD-40 WHITE LITHIUM SPRAY GREASE to solve the problem. This will prevent rust from forming in the lock. However, it is important that you apply the oil in the right place in the lock so that the WD-40 gets to the moving parts to ensure proper lubrication.